Skip to content

Products

<< Return

6x36WS (Warrington Seale)

In most rope sizes, only one 6 x 36 classification rope is made. These constructions were selected to provide fatigue resistance without having wires that are too small.

The greater number of wires in the 6 x 36 classification makes these ropes more susceptible to crushing. This can be minimized, however, by specifying an Independent Wire Rope Core (IWRC) and by using well-designed sheaves, grooved drums and proper operating techniques.

FIBER CORE IWRC
Diameter
(in.)
Approx.
wt./ft.
(lbs.)
Minimum
Breaking
Force
(tons of
2000 lbs.)
IPS
XIP ®
Approx.
wt./ft.
(lbs.)
Minimum
Breaking
Force
(tons of 2000
lbs.)
IPS XIP ®
XXIP ®
3/16 0.059 1.55 1.71
1/4 0.105 2.74 3.02 0.116 2.94 3.40
5/16 0.164 4.26 4.69 0.18 4.58 5.27
3/8 .0236 6.10 6.72 0.26 6.56 7.55 8.30
7/16 0.32 8.27 9.10 0.35 8.89 10.2 11.2
1/2 0.42 10.7 11.8 0.46 11.5 13.3 14.6
9/16 0.53 13.5 14.9 0.59 14.5 16.8 18.5
5/8 0.66 16.7 18.3 0.72 17.9 20.6 22.7
3/4 .095 23.8 26.2 1.04 25.6 29.4 32.4
7/8 1.29 32.2 35.4 1.42 34.6 39.8 43.8
1 1.68 41.8 46.0 1.85 44.9 51.7 56.9
1 1/8 2.13 52.6 57.8 2.34 56.5 65.0 71.5
1 1/4 2.63 64.6 71.1 2.89 69.4 79.9 87.9
1 3/8 3.18 77.7 85.5 3.50 83.5 96.0 106
1 1/2 3.78 92.0 101 4.16 98.9 114 125
1 5/8 4.44 107 118 4.88 115 132 146
1 3/4 5.15 124 137 5.67 133 153 169
1 7/8 5.91 141 156 6.50 152 174 192
2 6.72 160 176 7.39 172 198 217
2 1/8 7.59 179 197 8.35 192 221 244
2 1/4 8.51 200 220 9.36 215 247 272
2 3/8 10.4 239 274
2 1/2 11.6 262 302
2 5/8 12.8 288 331
2 3/4 14.0 314 361
2 7/8 15.3 341 392
3 16.6 370 425
3 1/8 18.0 399 458
3 1/4 19.5 429 492
3 3/8 21.0 459 529
3 1/2 22.7 491 564
3 5/8 24.3 523 602
3 3/4 26.0 557 641
3 7/8 27.7 591 680
4 29.6 627 720
4 1/8 31.7 658 757
4 1/4 33.3 694 799
4 3/8 35.4 734 844

Available galvanized at 10% lower strengths, or in equivalent strengths on special request

Back To Top